Category Archives: iPhone 4

Leaked iPhone 5 Rear Housing with Dock Connector&Headphone Jack

Most of us seen the photos of next generation iPhone 5’s logic board, 9-pin dock connector as well as front screen assembly set. Today iPhone 5 rear housing with dock connector flex cable and headphone jack assembly is leaked.

The dock connector and headphone jack assembly was placed in the rear housing to see if the leaked parts of Apple’s new iPhone fit well. As you can see from the screenshot below, the two parts seem to fit extremely well.

iphone 5 housing

We were able to fit the docking port and headphone jack assembly that we showed you on Friday into the new iPhone’s frame/back casing. The docking port and headphone jack assembly seemed to fit perfectly inside of the frame. One of our technicians was even able to screw the assembly into the pre-aligned screw holes inside of the frame. All of the threading and screw holes lined up perfectly with the screw holes in then docking port/headphone jack assembly.

The photos of the assembly also give a good idea of what the bottom of iPhone 5 will look like, compared to iPhone 4S. As you can see, it has a much smaller dock connector, which makes way for the headphone jack and larger speaker grille.

Apple is widely expected to release the 6th generation iPhone at a media event on September 12th, followed by the launch on September 21st.

Share

Apple’s 9-pin New Dock Connector

According to rumors, it is reported that Apple will use new 19-pin dock connector on iPhone 5 and other Apple products, such as new iPod touch, new iPad mini. But now new rumors said 9-pin new dock connector will be the right parts for the entire new lineup of iOS devices such as the next generation iPhone, iPad mini, next generation iPod touch that is will be unveiled at a special media event on September 12th and even the iPad 3 that was launched back in March, will come with the new connector.

Until now, it was widely speculated that the reason for replacing the 30-pin connector with something more compact is to make room for components for next generation iOS devices, such as 4G radios, bigger batteries, new sensors etc.

AppleInsider has received some more interesting information about Apple’s new dock connector.
apple 9 pin new dock connector
According to AppleInsider, the new dock connector will not only be smaller, but it will also offer much faster I/O connectivity and transfer rates even with just a fraction of the number of electrical contacts as the current 30-pin dock connector.

They say the 8 gold contacts seen on one side of the male plug in recently leaked photos of the connector are simply repeated on the flip side. They’re reportedly joined by the surrounding aluminum-colored metal shell of the connector, which will similarly serve as a functional contact, bringing the total number of pins to 9.

The new connector will also deliver a number of welcomed enhancements for consumers, according to people familiar with the design, one of which will be its orientation independence when plugged into any one of Apple’s future iOS devices.

“The beauty of this connector is that it no longer matters which side is up when you insert it into the phone,” one of those people explained. “It’s like MagSafe for MacBook – every orientation is the correct one.”

Orientation independence will be a much-needed improvement as it is quite a pain to use the USB cable to dock connector, especially after getting used to MacBook’s MagSafe connector.

There has been some debate about the number of pins in the new dock connector. Reports have claimed that it will come with a 8-pin and 19-pin dock connector, but based on the information AppleInsider has received, it looks like the next iPhone will come with a 9-pin dock connector, which is in line with code references discovered in iOS 6 beta.

It has been also speculated that the new dock connector will include an attachment mechanism similar to the MagSafe connector used on the MacBooks, which would allow users to insert the cable in either orientation and also make it easier for the charging cables to simply snap into place.

Apple is expected to also offer an adapter for the smaller dock connector to allow users to connect accessories using the old 30-pin dock connector to the new 9-pin dock connector.

Are you excited about the new MagSafe-like connector with faster transfer rates and orientation independence?

Share

iPhone 5 Logic Board Leaked

Recently so many iPhone 5 replacement parts are revealed, including the photos of iPhone 5 logic board.  The purported next generation iPhone’s motherboard appears to be different from the one used in the iPhone 4S and iPhone 4.

The processor and other support chips are however missing from the motherboard pictured in these photos. It is widely expected that the next generation iPhone will come with a variant of the dual-core A5X processor that powers the new iPad.

iPhone5 logic board

Meanwhile iPhone parts specialists have noticed that the SIM card slot appears to be smaller in size than the iPhone 4S and iPhone 4, which could indicate that the new iPhone will need a nano-SIM as reported earlier.

The repair firm also reports that the battery connector has five pins, compared to four pins on the iPhone 4S, which may point to support for 4G LTE network.

They also noticed that the digitizer connector for the display has been tweaked, which may point to the use of new screen technology in the next iPhone. According to rumors, Apple is planning to use in-cell touch panels in the next generation iPhone that could allow it to make it thinner than iPhone 4S.

It is also noted that the screw holes of the motherboard matches with the unibody back panel that was leaked previously. They’ve also created a gif that compares the size and the connections of the motherboard in the photos to the parts that were leaked earlier.

It is difficult to confirm the authencity of the photos, but all will be come ture month later.

Share

19-pin Dock Connector On New iPhone 5 To Make Room For Headphone Jack

19-pin Dock Connector On New iPhone 5 To Make Room For Headphone Jack

A Reuters report, published today, claims that the new iPhone 5 will feature a smaller, 19-pin dock connector, making room at the bottom for a headphone jack.

Current iPhone 4 or iPhone 4S have the headphone jack at the top, and a 30 pin dock connector at the bottom. The switch will make room for additional components like an LTE chip and a relocated headphone jack.

iphone 5 dock connector

The iPhone 5, Apple’s next generation iPhone expected to go on sale around October, will come with a 19-pin connector port at the bottom instead of the proprietary 30-pin port “to make room for the earphone moving to the bottom”, two sources familiar with the matter told Reuters.

Cases are already being built for the next iPhone incorporating the smaller dock connector and the relocated headphone jack. These cases, presumably, are built on the leaked schematics that we’ve seen earlier. Rumors suggest that the 19-pin connector would also be included in the iPad mini.

Reuters notes that a new dock connector would infuse the third party Apple accessory industry with renewed growth, since iPhone docks, speakers and connectors that have been sold till now will all become incompatible, unless Apple also sells a 30-pin to 19-pin converter.

Share